Teensy 4.0 + Maestro6 (CRC)
Pololu Micro Maestro 6-channel Servo Controller. Most microcontrollers I have used can control servos directly. Delegating the responsibility does free up the microcontroller. I have plans for the microcontrollers to do more calculations. The Maestro looks a bit dated with a USB mini-B connector but works fine. I did need to install the Pololu Maestro Control Center software on a laptop in order to set the Maestro Serial mode. This software was required to turn on the CRC message checker.
Photo
![Teensy 4.0 + Maestro6 (CRC)](20200815_175345/20200815_175345_600.jpg)
![Teensy 4.0 + Maestro6 (CRC)](20200815_175352/20200815_175352_600.jpg)
![Teensy 4.0 + Maestro6 (CRC)](20200815_175401/20200815_175401_600.jpg)
![Teensy 4.0 + Maestro6 (CRC)](20200815_175406/20200815_175406_600.jpg)
![Teensy 4.0 + Maestro6 (CRC)](Maestro6/Maestro6_600.jpg)
![Teensy 4.0 + Maestro6 (CRC)](Maestro6c/Maestro6c_600.jpg)
![Teensy 4.0 + Maestro6 (CRC)](MaestroIgnore/MaestroIgnore_600.jpg)